







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Walk-In Shower Really Costs in Miami, FL (And Why the Cheap Number Fails Inspection)
A Miami walk-in shower typically runs $5,310 to $14,160, installed. That range assumes the shower is built to pass Miami-Dade inspection on the first review, with a continuous waterproofing membrane behind every tiled surface, not cement board alone. The $6,000 bid you saw is usually a bid that leaves the membrane out. Call (844) 797-4435 for a written price before any work starts. The Garrison Standard means the number you get is the number you keep, and the 365-Day Done Right Promise covers grout failure, tile delamination, and door seal failure for a full year in writing.

Why Miami Showers Cost More Than Mainland Florida Bids Suggest
Miami-Dade’s building code is the strictest wind-load and product-approval regime in the country, and the waterproofing standards inside it are just as unforgiving. A shower assembly has to hold up against year-round humidity, salt air, and a rainy season that runs June through November. Our technicians have up to 22 years of experience here, and the failures we get called out to fix almost always start the same way: a low bid that skipped the membrane and blamed the tile.
What a real Miami shower scope includes that a cheap quote tends to drop:
- Demolition of tile and cement board: $400-$700. Hauling out a failed pan and backer is dirty, dusty work, and it’s the first line low bids trim.
- Moisture inspection of the stud or block cavity: around $150. This tells you whether the wall behind the old shower is sound before a new assembly covers it up.
- Waterproofing membrane system: $600-$900 in materials alone for a 36 sq ft shower. Schluter KERDI and RedGard are the systems we specify most, and they meet the ANSI A118.10 standard inspectors check for.
- Tile, setting materials, rough-in, and fixtures: the visible line items, and the ones buyers compare first.
That membrane line is the whole story. A $6,000 number that looks competitive against a $9,500 bid usually becomes the $9,500 once the walls are open and the correct materials go in. The difference isn’t markup. It’s a continuous waterproof layer the inspector requires and shortcuts leave out.
CBS Block, Permits, and the Sequencing That Sets Your Timeline
Most of Miami’s west and south side is built from concrete block and stucco (CBS), post-war ranch housing. Concrete block absorbs moisture differently than wood framing. During a heavy rainy season, block holds water longer, so before cement board or membrane goes up, the block has to be treated with a masonry waterproofer. That step adds a curing day to the schedule. Skip it and you’re looking at tile delamination within 18 months, long after the crew has packed up.
Permits matter just as much to your timeline as they do to your wallet. Any shower pan replacement or drain relocation requires a licensed plumber to pull a permit in Miami-Dade, and the rough inspection has to pass before tile goes in. That sequencing is fixed. It’s also why a real written scope prices the inspection window into the project instead of promising an impossible two-week turnaround. For a broader comparison of what a full bath costs here, see our page on Bathroom Remodeling in Miami.

What to Look for in a Miami Walk-In Shower Contractor
Judge the bid the way an inspector would, not the way a homeowner compares paint colors. A few things separate a squared-away scope from a hopeful one:
- A membrane named on paper. KERDI, RedGard, or another ANSI A118.10 system should be listed by name, not implied.
- The plumbing permit spelled out. If the rough inspection and permit handling aren’t in the written price, they’ll show up as an add later.
- Written guarantee terms. Ask exactly which failure modes the warranty covers. Ours are listed. Many aren’t.
- Traceable surface materials. Cambria and Caesarstone are documented to manufacturer spec sheets with known moisture and stain ratings. That’s what we specify for niches and benches, not whatever’s on the truck.
Our trades are background-checked and uniformed, so you know who’s arriving. That standard is set at the Garrison Partners level. Bradford Remodeling Co Miami is part of that family (established 2004), independently owned and operated, and every location is held to The Garrison Standard. Behind that sits a live person on the phone around the clock, not a voicemail queue.
Walk-In Shower Cost Breakdown for Miami, FL
| Line Item | Typical Cost |
|---|---|
| Walk-In Shower Installation (full project) | $5,310-$14,160 |
| Tub-to-Shower Conversion | $4,130-$11,800 |
| Shower Replacement (like-for-like) | $3,540-$10,030 |
| Demolition of existing tile and cement board | $400-$700 |
| Moisture inspection of block cavity | $150 |
| Waterproofing membrane (36 sq ft) | $600-$900 |
| Full Bathroom Remodel (for comparison) | $10,620-$33,040 |
| Small Bathroom Remodel (for comparison) | $5,900-$14,160 |
The lead range reflects a standard walk-in shower with a tiled pan, name-brand fixtures, and proper membrane. Luxury glass, larger footprints, and niche detailing push toward the top end. Plan on a tile shower in a CBS home anywhere in the $8,000 to $12,000 band most of the time, and treat any quote far below that as a scope gap worth questioning.
Questions Miami Homeowners Ask Before Signing
Is it cheaper to repair a failing shower or replace it?
A repair almost always costs less upfront, usually the $3,540 to $10,030 replacement band applied to a partial fix. But if the underlying failure is a missing or failed membrane, a patch is money spent twice, since the tile has to come out eventually anyway. A moisture inspection at around $150 tells you which situation you’re in before you commit.
How long does a walk-in shower take in Miami?
Plan on two to four weeks of active work on a typical Miami installation. The permit and rough inspection, plus the masonry curing day in CBS homes, add real days that can’t be compressed. We price those windows into the written scope instead of quoting a fantasy timeline.
Do I need a permit for a shower replacement in Miami-Dade?
Yes, if the shower pan is replaced or the drain moves. That triggers a licensed plumber’s permit, and the rough inspection must pass before tile. Leaving the permit out of a bid is the single most common way a low number becomes a surprise invoice.
Does the 365-Day Done Right Promise cover shower failures?
Yes. It covers grout failure, tile delamination, and door seal failure in the first year, in writing, at no charge to correct. Ask any shower contractor to name the covered failure modes on paper. Most can’t, and that’s the tell.
Get Your Written Price Before Any Work Starts
Walk-in shower costs in Miami are a materials story before they’re a labor story, and a written price is the only way to know what you’re buying. Call (844) 797-4435 for a free estimate. We’ll give you a fixed number in writing, handle the permit and inspection, and leave the site clean with your signed guarantee in hand.
Written by the team at Bradford Remodeling Co Miami, serving Miami, FL.
What Our Customers Say
"Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.












